Product Summary:
The WOA-D2 series magnetic induction encoder is an internal non-contact absolute encoder for measuring the rotating position of the motor. The product is a magnetic induction multi-turn sensor independently developed by Miran Technology. With the addition of signal conditioning and algorithm, it can calculate the absolute Angle and output analog signal and digital signal at the same time.
- Product Overview
- Technical Parameters
- Size selection
I.WOA-D2 Dual Output Magnetic Induction Multi-turn Angle Sensor Overview:
The WOA-D2 series magnetic induction encoder is an internal non-contact absolute encoder for measuring the rotating position of the motor. The product is a magnetic induction multi-turn sensor independently developed by Miran Technology. With the addition of signal conditioning and algorithm, it can calculate the absolute Angle and output analog signal and digital signal at the same time.
II.WOA-D2 Dual output magnetic induction multi-turn Angle sensor Features:
●Signal output: RS485 half-duplex communication, 4-20mA, 0-5V, 0-10V
● Support (max) speed 600rmp
● Small size
● Strong anti-pollution ability
● Absolute value output, data power down memory
III.WOA-D2 double output magnetic induction multi-turn Angle sensor application field:
● Servo control system
● Robot arm
● Position measurement
● Industrial automation control
● DC motor
IV. WOA-D2 double output magnetic induction multi-turn Angle sensor Technical specifications:
· Technical Specifications | Content | |
Analog output | Digital output | |
Output signal | 0～5V/0～10V/4～20mA | RS485 |
Voltage supply | +12～24VDC | +12～24VDC |
Resolution | 16 bit | Single turn 12 bit |
The number of turns can be calibrated | 1 ~ 4080 cycles (analog output is recommended within 40 cycles) | |
Linearity | ≤0.2%F.S. | ≤0.2%F.S. |
Direction of rotation | Clockwise/counterclockwise | |
Allowable rotation speed | ≤600rpm | |
· Response frequency | 100Hz | |
· Working Temperature | -10℃～60℃（At low temperature, it must be kept in a non-crystalline state） | |
Note: ① After the analog output is selected with a larger number of turns, the resolution will also deteriorate.
② Due to the initial of the internal circuit after the power is turned on, please power on 50msec and then enter the command. The interval between each power-off and power-on is greater than 10 seconds.
V. Induction multi-turn Angle sensor selection:
VI. WOA-D2 double output magnetic induction multi-turn angle sensor wiring mode:
· Wire connection color | Function declaration | Remarks |
Red | Positive pole VCC | +12V～24VDC |
Black | Negative pole GND | 0V |
Green | RS485-A/OUT+ | Signal output |
White | RS485-B/OUT- | Signal output |
Yellow | 4-20mA/0-5V/0-10V | Analog output |
Shielded wire | · Case Ground | GND |
VII.WOA-D2 Dual output magnetic induction multi-turn angle sensor mounting dimensions:
