KSE pull rod displacement sensor (alias: crack meter, crack displacement sensor, electronic ruler, resistance ruler, potentiometer, displacement sensor) Principle: Potentiometer principle, all sensors for position measurement type, used to adjust the system (control system) and measurement system, direct measurement of displacement and length, output DC voltage signals, can also be through the built-in or external V/A transmitter module to convert signals into standard 0-5V, 0-10V or 4-20mA DC signals, Control requirements can also be transmitted remotely. KSE pull rod displacement sensor (alias: crack meter, crack displacement sensor, electronic ruler, resistance ruler, potentiometer, displacement sensor) Output displacement change: 0-100% given input operating voltage (changes with displacement).
KSE pull rod displacement sensor technical parameters and installation dimensions:
KSE minitype | 5mm | 10mm | 15mm | 20mm-25mm | 30-55mm | Stroke Length (mm) 5 10 15 20 25 30 35 40 45 50 55 |
Linear Precision (±%FS) | ±0.1% |
Resistance (±10%) | 2ΚΩ | 5KΩ |
Effective Stroke | range+3mm |
Resolution | Infinite |
Repeatability Precision | 0.01mm |
Temperature Coefficient | ≤1.5ppm/℃ |
Recommended Current | ≤1mA |
Input Voltage | (4ΚΩ~5ΚΩ): ≤24VDC;(2ΚΩ~3ΚΩ)≤12VDC;(1KΩ)≤5VDC |
Output | 0~100% × input voltage (change with the movement of the rod) |
Sensitivity | 1 |
Temperature Drift | infinitesimal |
Load Characteristic | ≥10mA |
Very long life | >100*1000000 cycles,>2*1000000 m |
KSE pull rod displacement sensor signal output:
Resistance output type (potentiometer) : 5kΩ, 2KΩ,
Voltage output type (external/built-in module) : 0-5V, 0-10V,
Current output type (external/built-in module) : 4-20MA (two-wire system, three-wire system),
Digital signal (external/built-in module) : RS485,
KSE pull rod displacement sensor Application field:
Crack measurement and monitoring, bridge measurement and monitoring, shoe machine, 3D seat, prestressed jack, mechanical arm, robot, removal machine, brick machine, ceramic machinery, sluice control, woodworking machinery, hydraulic machinery, etc.