Attention:The stroke is from 75mm-5000mm. If you need different lengths of travel, please contact with the supplier. The default output: 0-100% of the power supply voltage value, which is resistance out put, if you need other signal output, such as 4-20mA, 0-5V, 0-10V,and RS485 signal output please purchase the transmission module in the shop or contact with the supplier...
Technical Parameter
KTF Linear Transducer | 75~110mm | 125~175mm | 200~550mm | 600~1000mm | 1150~2000mm | 2000mm↑ | Stroke Length (mm) 75 100 110 125 130 150 175 200 225 250 275 300 325 350 360 375 400 425 450 475 500 550 600 650 700 750 800 850 900 950 1000 1150 1250 1350 1450 1500 1600 1800 2000 2250 2500 2800 3000 |
Linear Precision (±%FS) | ±0.1% | ±0.05% | ±0.04% |
Resistance (±10%) | 5ΚΩ | 10ΚΩ | 20ΚΩ |
Effective Stroke | range+3mm |
Resolution | Infinite |
Repeatability Precision | 0.01mm |
Max Speed | 10m/S |
Recommended Current | ≤10uA |
Max Power Supply | 36V |
Temperature Coefficient | normal 5 ppm/K |
insulating Strength | ≥10MΩ |
Insulating Strength | ≤100uA |
Case Dimension(A) | rang e+56mm |
Effective Stroke | rang e+8mm |
Max Bearing Pull | 50KG |
Working Stress | horizontaldiraction<10N |
vertical direction≤10N |
Vibration Resistance Level | 5...2000HZ, A max=0.8mm, a max=20g |
Shock Resistance Standard | 50g, 11ms |
Temperature Range | -60℃~+150℃ |
Ingress Protection | IP67(DIN40500/IEC529) |
Sensitivity | 1 |
Temperature Drift | infinitesimal |
Very long life | >100*1000000 cycles,>25*1000000 m |
Applications: KTF/KTF1 Slide Type is a small type for generic use, suitable for large injection machines,
rubber machines, woodworker machines,hydraulic machines and so on.
Installation Size(mm)
KTF1 slider type electronic ruler output type:
Resistance output type (potentiometer) : 5kΩ, 10KΩ, 20KΩ,
Voltage output type (external/built-in module) : 0-5V, 0-10V,
Current output type (external/built-in module) : 4-20MA (two-wire system, three-wire system),
Digital signal (external/built-in module) : RS485
KTF1 slider type electronic ruler application scope:
Application: KTF1 slider displacement sensor is a general installation of miniaturization, especially suitable for reducing the mechanical length direction of the installation size, suitable for large stroke type applications, such as: large injection molding machine closing stroke, rubber machine closing stroke, woodworking machinery, hydraulic machinery.