Shenzhen Miran Technology Co., Ltd.， English website，linear position sensor，Displacement sensor for injection molding machine

Current Position:Home > Product > Water-proof Linear Wire Potentiometer

Water-proof Linear Wire Potentiometer

←

→

Product Name:WEP-S Draw Wire Potentiomerer
Product Summary:

WEP-S pull-wire displacement sensor, also known as pull-wire encoder, pull-wire ruler, pull-wire ruler, pull-wire encoder, pull-wire displacement sensor, is a sophisticated integration of linear displacement sensors in structure, fully combining angle sensors and linear displacement sensors The advantages are that it is an excellent sensor with compact structure, long measurement stroke, small installation space size and high-precision measurement. WEP-S pull wire displacement sensor series products have a lot of choice, the stroke ranges from 200mm to 20000mm, with analog current signal mA: 4-20mA, analog voltage signal V1: 0-5V, V2: 0-10V, pulse signal P: A, B, Z phase digital output, RS485 digital signal output. Meet various signal requirements for long stroke and high accuracy

Download:

Global Online Advisory

Product Overview
Technical Parameters
Size selection

Output type:

Resistance output type (potentiometer): 5kΩ, 10KΩ,

Voltage output type: V1: 0-5V, V2: 0-10V,

Current output type: 4-20MA (two-wire system, three-wire system),

Pulse output type: P: A B Z phase,

Digital signal (external / built-in): RS485,

Installation Precautions:

1. Utilize 4 fixing screw holes at the bottom, according to the needs of the site and the installation space of the machine, directly install or add protection or other mechanical use.

2. When installing the stainless steel cable, pay attention to the horizontal angle, that is, try to make the cable from the wire outlet to the mechanism of the moving part, and slide horizontally during work.

3. Keep a small angle (allowable deviation +/- 3 °) to ensure the measurement accuracy and the life of the cable.

The body of the wire rope is stainless steel with a fluorine coating. Do not allow it to be cut, burned, or impacted by external forces. Excessive dust, debris, or items that can damage the wire rope are stored in the pulley. Or the outlet will cause the cable to break, resulting in malfunction.

4. Do not pull out the steel cable by hand or other products before it is installed on the workbench or fixed seat. This will cause the steel cable to break, damaging the body structure and personal safety.

5. The instantaneous acceleration of the reciprocating motion of WEP-S and WEP-M series products cannot exceed 1 m / s; the instantaneous acceleration of the reciprocating motion of WEP-L and WEP-LP series products cannot exceed 0.5 m / second; this will cause The cable is broken, and the company does not assume responsibility outside this range.

6. If it is used in a non-linear motion mechanism, please install an appropriate pulley for operation.

7. If it is used in harsh environment or special occasions, please install protection mechanism by yourself.

Application Product Category:

Storage location positioning, reservoir dam protection, gate opening control, pressure machinery, paper machinery, textile machinery, sheet metal machinery, packaging machinery, printing machinery, level controllers, construction machinery, industrial robots, injection machines, woodworking machinery, elevators , Air compressor / hydraulic machine, height machine, XY axis and other length displacement, liquid level and other related size measurement and position control.

Return