0.05 level accuracy, measurement and control speed can be set from 10 times to 400 times per second.
■ The display range is -99999 to 99999.
■ Analog universal input, select by setting.
■ Optional alarm output of 1-4. Including upper limit of measured value, lower limit of measured value, upper limit of deviation, lower limit of deviation, upper limit of absolute deviation, lower limit of absolute deviation, fault alarm, seven basic alarm modes and four standby alarm modes. (Standby alarm mode: refers to no alarm when the measured value is in the output interval when the meter is powered on. When the measured value enters the non-output interval, a standby condition is established, and then the alarm is normal.)
■ Improved standardization and rich functions. Including: input signal fault processing, measurement value clearing, peak and valley value acquisition, 10-segment polyline correction and other functions.
■ Optional transmission and communication.
Note①: A size instrument
l When 1-point digital input is selected, the transmitter output and communication functions of the meter can only be selected from two alternatives.
Note②: C size instrument
l When selecting external power supply, the meter's 1-point digital input, transmission output, and communication functions can only be selected from one of three (at this time, the communication only supports RS485);
When 1-point digital input is selected, the external supply output, transmission output, and communication functions of the instrument can only be selected from three (at this time, the communication only supports RS485);