Product Hello,Welcome to the Miran Technology Co., Ltd. official website! Here you can find: Linear Position Sensor,Magnetic Displacement Sensor,etc.
Chinese Displacement Sensor Leader    中文 EN

Email:info@miran-tech.com

Current Position:Home > Product > Linear Position Sensor
Linear Position Sensor
Product Name:KTC1 Rod Type Displacement Sensor
Product Summary:

KTC1 is the follow-on products of KTC from MIRAN. It is upgrated in the original KTC displacement sensor, and its precision and stability are greatly improved.

Download:
Global Online Advisory
  • Product Overview
  • Technical Parameters
  • Size selection

KTC1 Universal Pull Rod Type Linear Displacement SensorWorking Stroke0-1250mm(Other Strokes Can Be Ordered)

Product Introduction:

KTC1 serious products is combined with more than ten years of manufacturing experience by the company and customer's feedback, and to be improved by the engineering department and R & D department together to optimize the upgrading.Its Product appearance, internal structure, material, production process, technical parameters and sealing grade parameters have been substantially upgraded, and its raw materials are imported, also manufacturing fully adopts the current international industry with the most advanced technology. The performance indicators and technical parameters still meet the industry's highest standards after fifty million times of reciprocating life test. The signal output end and the link plate device won the national utility model patent, and the appearance of the product obtained the national patent of appearance design.



Characteristic:

The series sensors are used to measure and control the system, direct and absolute measurement of displacement and length,woke stroke can be most1250mm and high resolution 0.01mm, which can provide accurate linear displacement measurement. The sensor structure design considers convenient installation and disassembly.

Sensor inside and outside the surface of the structure through special treatment, can work under high speed and low wear state. The flexible buffer bearing at the front of the sensor can overcome some minor side stress of the transmission rod and ensure the sensor working normally. Sensor conductive material fixation and structural design ensure that the sensor can work reliably even under the worst conditions.

There are some stroke as follow:

50mm   75mm   100mm  110mm  125mm   130mm   150mm   175mm   200mm  225mm   250mm   275mm  300mm   325mm   350mm   360mm  375mm  400mm  425mm  450mm  475mm  500mm  550mm   600mm   650mm   700mm   750mm   800mm  850mm  900mm  950mm  1000mm   1150mm  1250mm

Copyright:Shenzhen Miran Science and Technology Co., Ltd. 粤ICP备05064598号
Top